Putting my beloved and highly updated boat for sale. If anyone may know someone that is looking i would appreciate it. Thank you. Steve https://www.boattrader.com/boat/2000-catalina-400-mkii-8353698/

Hi all I had to replace the rudder on my boat I need to double check that the mechanic installed the quadrant correctly the rudder sensor connection was, I thought, on the top of the quadrant but now

My boat sits quite a bit, and I notice the raw water impeller vanes tend to get a curl to them. Seems like I could reinstall it in the other direction, so the vanes fit the volute tighter. I have prob

C400/445 Colleagues: Thanks, Lance!! Please see the attached. …thoughts? Regards, Frank, #247 From: Frank Falcone Sent: Thursday, June 2, 2022 4:57 PM To: Howard Selover (howard.selover.3rd@...) <howa

C400/445 Colleagues: Please see the attached regarding AGM Battery testing. Is there such a piece of test equipment? Regards, Frank, #247 From: Howard Selover <howard.selover.3rd@...> Sent: Thursday,

Colleagues: Does anyone know how to tell when AGM Batteries are ready for replacement? Is there some sort of actual physical test that can be done to the batteries while they’re still ‘in place’ in or

Ahoy! It's that time again. I'm looking for C400 tech articles to run in the next Mainsheet Magazine. You don't have to be a Pulitzer Prize winning writer, or the most brilliant engineer in the world.

I have C400 MKii (year 2000, #164). There is a small collection area aft of the compression post. The area collect water from the forward area and the forward A/C. The area is separated from the “main

Hi, So happy that our new (to us) C400 has a strong user group of a le and willing mentors to help us through the learning about our boat! Our companionway slider can slide all the way out into the co

New reef system…gigantic improvement! Cost was about $20 and took all of twenty minutes. Reef hooks were from Seadog and the new longer SS bolt was from Ace Hardware. This is a game changer, and now m

I am in need of a new rudder. We ran aground in north of Charleston on a falling tide and it appears that the rudder is bent pretty good. Has anyone replaced one on a mark 1 is so where did you source

Hi All I am planning to replace all of the hoses for the front head holding tank. Does anyone know how to remove the old pump out hose attached to the deck fitting and replace it with a new hose. Than

Hi, Does anyone know if there is enough depth at the top of the instrument panel at the aft end of the cockpit table to accommodate a surface mounted AXIOM 9+RV? C400-299 Chris

To all of the fellow C400 owners in the Pacific Northwest and British Columbia: Kindly let me know if are considering selling your vessel. I'm very fond of, and familiar with, the C400, and would be h

Catalina 400 group, I am interested in buying used 135 jib and non furring main sail. Larry larryRcrossman@...

Hello everyone! We are the proud new owners of hull #299. She is currently in Vermont but will be moved to Georgian Bay this summer. We have enjoyed our Niagara 35 "Tamarack I" for over 20 years and r

Hi, I have heard that that spider cracking, to various degrees, is fairly common around the anchor locker. Would anyone care to weigh in on this? If so, any ideas as to why? Thanks, Chris

Ahead of a planned ocean crossing next year, we are replacing the existing rudder on our 2000 C380 with a new one that has the thicker rudder post/stock. The rudder profile was common to the C400 and

Does anyone know the tonnage (net and gross) for the purposes of registration of a C400 in Canada?

Hi I need is the service manual for the westerbeke 42b that explains how to remove and replace various components. I have looked on the westerbeke site and can’t locate a copy of it. Does anyone eithe