|
Re: Binnacle Compass
If you have bubbles in the compass adding fluid doesn't help.
Call Ritchie Navigation company 781-856-5121 and order diaphragm NV- 0054 and "O" ring under the glob glass NV -0021 for Navigator Flush
If you have bubbles in the compass adding fluid doesn't help.
Call Ritchie Navigation company 781-856-5121 and order diaphragm NV- 0054 and "O" ring under the glob glass NV -0021 for Navigator Flush
|
By
Boris Keselman
·
#10399
·
|
|
Re: Binnacle Compass
Thanks saw that. Found one new on Amazon for $254. Need it now and I’ll see over the winter on getting the other repaired and use as a spare when the other one goes.
Pardon my spelling - sent from
Thanks saw that. Found one new on Amazon for $254. Need it now and I’ll see over the winter on getting the other repaired and use as a spare when the other one goes.
Pardon my spelling - sent from
|
By
Andrew Massey
·
#10398
·
|
|
Re: Binnacle Compass
Andrew,
As it shows on Craig's pic, the model # is Ritchie FN-201.
Tom Soko
--
Tom Soko
Juniper #307
Noank, CT
Andrew,
As it shows on Craig's pic, the model # is Ritchie FN-201.
Tom Soko
--
Tom Soko
Juniper #307
Noank, CT
|
By
Tom Sokoloski
·
#10397
·
|
|
Re: Binnacle Compass
See attached. Just got mine off and there's an active leak somewhere. Rats. Diameter of the globe is about 4.5"
Craig
See attached. Just got mine off and there's an active leak somewhere. Rats. Diameter of the globe is about 4.5"
Craig
|
By
Craig Howard
·
#10396
·
|
|
Re: Binnacle Compass
Anyone know what model this compass is or diameter (not at boat right now). Think I’m going to replace.....
Pardon my spelling - Sent from my iPad
Anyone know what model this compass is or diameter (not at boat right now). Think I’m going to replace.....
Pardon my spelling - Sent from my iPad
|
By
Andrew Massey
·
#10395
·
|
|
Re: Binnacle Compass
I had the same problem when I bought "Priorities" ten years ago. You can do it yourself with Richie's Compass Fluid (I think Defender sells it), or have a compass repair shop overhaul your compass.
I
I had the same problem when I bought "Priorities" ten years ago. You can do it yourself with Richie's Compass Fluid (I think Defender sells it), or have a compass repair shop overhaul your compass.
I
|
By
Jeff Bird
·
#10394
·
|
|
Re: Binnacle Compass
On my prior boat I had a bubble in the globe. I was told to use and I did use ordorless mineral spirits. It was a Ritchie Globemaster. Remove the compass from the mount and on the underside I found a
On my prior boat I had a bubble in the globe. I was told to use and I did use ordorless mineral spirits. It was a Ritchie Globemaster. Remove the compass from the mount and on the underside I found a
|
By
Alan Johnson
·
#10393
·
|
|
Re: Binnacle Compass
Are these oil or some other non-freeze liquid filled. I have one that was a bubble now dry need to fix or replace also. Where would the fluid go to if it leaked out? See no evidence of any that I can
Are these oil or some other non-freeze liquid filled. I have one that was a bubble now dry need to fix or replace also. Where would the fluid go to if it leaked out? See no evidence of any that I can
|
By
Andrew Massey
·
#10392
·
|
|
Re: Binnacle Compass
Craig, you need to take it to a company that repairs compasses which usually also repair other instruments such as survey equipment.
Doug # 104
Craig, you need to take it to a company that repairs compasses which usually also repair other instruments such as survey equipment.
Doug # 104
|
By
Doug Burr
·
#10391
·
|
|
Binnacle Compass
I've got a large bubble in one of the compasses on my binnacle. How does one go about fixing that?
Thanks,
Craig
I've got a large bubble in one of the compasses on my binnacle. How does one go about fixing that?
Thanks,
Craig
|
By
Craig Howard
·
#10390
·
|
|
Re: C400 Rudder failure...
On Sep 2, 2020, at 8:47 PM, Tim Francis <Tfrancis1979@...> wrote:
Craig. Remind me I’ll post the pics later. I’m finally out sailing across the channel to Maui.
On Sep 2, 2020, at 7:03 PM,
On Sep 2, 2020, at 8:47 PM, Tim Francis <Tfrancis1979@...> wrote:
Craig. Remind me I’ll post the pics later. I’m finally out sailing across the channel to Maui.
On Sep 2, 2020, at 7:03 PM,
|
By
Tim Francis
·
#10389
·
|
|
Re: C400 Rudder failure...
Craig. Remind me I’ll post the pics later. I’m finally out sailing across the channel to Maui.
Craig. Remind me I’ll post the pics later. I’m finally out sailing across the channel to Maui.
|
By
Tim Francis
·
#10388
·
|
|
Re: C400 Rudder failure...
Any chance someone can post the pic here? I can't see the pic without a facebook account and I prefer to stay away from facebook.
Thanks,
Craig
Any chance someone can post the pic here? I can't see the pic without a facebook account and I prefer to stay away from facebook.
Thanks,
Craig
|
By
Craig Howard
·
#10387
·
|
|
Re: C400 Rudder failure...
https://m.facebook.com/groups/1678650415708291?view=permalink&id=2763096200597035&ref=m_notif¬if_t=feedback_reaction_generic
Check this link out.
Somehow the chain on the port helm jumped off the
https://m.facebook.com/groups/1678650415708291?view=permalink&id=2763096200597035&ref=m_notif¬if_t=feedback_reaction_generic
Check this link out.
Somehow the chain on the port helm jumped off the
|
By
Tim Francis
·
#10386
·
|
|
Re: C400 Rudder failure...
Mk2
By
Tim Francis
·
#10385
·
|
|
Re: C400 Rudder failure...
Before you get too deep into the conversation, make sure you (and your responders) clarify which model you are talking about. The Mk I & Mk II steering systems are quite different. Not sure how much
Before you get too deep into the conversation, make sure you (and your responders) clarify which model you are talking about. The Mk I & Mk II steering systems are quite different. Not sure how much
|
By
4speedfunk
·
#10384
·
|
|
Re: C400 Rudder failure...
Ken my number is 512-971-5343 if you would be willing to give me a call.
I actually only unhooked two cables. I left the quadrant in tact in the same position the whole time so I wouldn’t mess up
Ken my number is 512-971-5343 if you would be willing to give me a call.
I actually only unhooked two cables. I left the quadrant in tact in the same position the whole time so I wouldn’t mess up
|
By
Tim Francis
·
#10383
·
|
|
Re: C400 Rudder failure...
Check the rotation of the quadrant to ensure your cable hookups were directionally correct. After splashing my boat following bearing rework this June, I discovered (underway mind you) a similar
Check the rotation of the quadrant to ensure your cable hookups were directionally correct. After splashing my boat following bearing rework this June, I discovered (underway mind you) a similar
|
By
K Pitser <Kpitser@...>
·
#10382
·
|
|
Re: C400 Rudder failure...
Does anyone know why my starboard steering wheel turns everything including the port steering wheel but when I turn the port steering wheel, there’s no response? I have everything hooked up and got
Does anyone know why my starboard steering wheel turns everything including the port steering wheel but when I turn the port steering wheel, there’s no response? I have everything hooked up and got
|
By
Tim Francis
·
#10381
·
|
|
Re: Honda 2000
Do any of you Honda 2000 users have issues with the reverse polarity light coming on (the one on the 120 volt panel)? I have tried this generator by simply plugging in the shore power cord with an
Do any of you Honda 2000 users have issues with the reverse polarity light coming on (the one on the 120 volt panel)? I have tried this generator by simply plugging in the shore power cord with an
|
By
Fritz Feiten
·
#10380
·
|