It appears that the teak fiddles on the Corian countertops are glued on. There are no visible plugs. Does anyone know what glue is best for this purpose? Thanks, Chris C400 #299 TASSIA

Hi Don: Thanks for your quick response. I'm, very much, looking forward to following the progress of your project! You are, for sure, our ELECTRIC PIONEER! Regards, Frank SILVER EAGLE, #247

The picture is our motor. The specs can be found at this address: https://electricyacht.com/product/quiettorque-30-lc-electric-motor/ Don -- Don and Ceci Snyder Just Chillin' Too (formerly the

Frank, You are way too kind but be assured...I will post the positives and negatives of this adventure experiment. This project is based on our assessment of our sailing activities now and in the

Hi Don: You are, indeed, THE MAN! We're so interested in your project. You're our PIONEER!! Regards, Frank, SILVER EAGLE, #247

Finally have gotten some real progress on our conversion: The motor has been ordered (finally): This was harder than I thought. There were two motors that we were considering: the QT20 and the

Thank you all for the replies. I had not thought to look at the rod holder or building an extender. Excellent ideas. On my stern railing I have the outboard motor mount (starboard) and GPS

Here's something I did that worked out well and was easy to do. I mounted the grill as far back as I could off the stern rails so I would maintain as much cockpit space and wouldn't drip grease on

Joe, We mounted ours to the stern rail with magma mounts. It seems to work well and is out of the way. I remove the cushion below when grilling and then I have a place to set a tray and anything I

My grill is mounted to the aft rail with a clamped fishing rod holder. see attached-- Matt Perry

I am looking at adding a Magma BBQ grill. (e.g. the Chefs Mate grill - rectangular ). When I look at the mounting options --- I have my doubts of where to place the unit. Anyone with experience --

Doh! Here's the picture.... -- Bret JoyRide, #205 Bellevue, WA

Here's our setup. It's a very poor picture, but the only one that shows our mounting. The base mounts on the flat area just to the side of the port, aft locker. The hoist actually goes through the

...used to be ours...

We had Garhauer also and I can't say enough positive about the organization and their products (and prices). I must confess I lucked into this location for the lift but it worked great. We kept the

We have hull 298.

Former owner here (2002 #251) but still lurk on the group. I installed a Garhauer on the stern rail with a lot of help from the folks at the company. I might suggest you contact them directly and

Hi I installed a stainless outfitters motor hoist on the starboard side. I don’t know how different this is from the Garhauer, but it works well. Attached is a picture. Note that I also

Greetings! I have a MKII with the dark blue interior with pattern and have found that this fabric is no longer available. I have spoken with both JSI in St Pete who made my boats cushions and also

The PO installed it on the stern of the boat. The ball is mounted port side of the locker on the swim platform. I will try to remember to take a picture where the ball is mounted when we are at the