Re: [EXTERNAL] Re: [C400] Mystery ground bar


Fritz Feiten
 

No bronze thru hulls below the water line. 

Fritz Feiten
206-914-6899
fritz.feiten@...

On Jan 24, 2022, at 9:08 AM, Stefan Damstrom <sdamstrom@...> wrote:


Could there have been a bronze thru hull where the Marelon one is now? I had one for the A/C intake which I swapped out because it wasn’t bonded.  

From: C400@Catalina400-445.groups.io <C400@Catalina400-445.groups.io> on behalf of Frank Falcone <frank.falcone@...>
Sent: Monday, January 24, 2022 6:50:28 AM
To: C400@Catalina400-445.groups.io <C400@Catalina400-445.groups.io>
Subject: Re: [EXTERNAL] Re: [C400] Mystery ground bar
 

Hmmm, interesting discussion. ...never had one of these on my boat, #247.

 

Regards,

Frank

 

From: C400@Catalina400-445.groups.io <C400@Catalina400-445.groups.io> On Behalf Of Bret via groups.io
Sent: Monday, January 24, 2022 9:34 AM
To: C400@Catalina400-445.groups.io
Subject: [EXTERNAL] Re: [C400] Mystery ground bar

 

I used to have a similar one. It normally mounts to a wood block glued to the “floor” somewhere and sits perpendicular to the prop shaft with the end resting on the shaft. The idea being it connects the shaft and prop strut.  (Although both of those have anodes already, so…

mine was in place for a while before it started making a horrible screeching noise when the shaft was turning. So I eventually removed it. 
--
Bret
JoyRide, #205
Bellevue, WA


--
Catalina 400 MKii #190
Bellevue, WA 

Join C400@Catalina400-445.groups.io to automatically receive all group messages.